Leather engraving is usually used in upper vamp, handbags, and dermises, boxes and cases, and so on. The processing forms include drilling holes, drawing lines on the surface or cutting pictures. The process requirements: no yellowing on the surface of the lines, the bottom color of the...

Small machines with double focusing mirrors are usually adopted for paper cutting because papers are thin and the pictures are generally clear. Small air pumps are proper and the effect will be better if RF laser diode is used. The key button films of mobile are also widely used by customers...

Organic glass materials are classified into many kinds and there is big difference between imported ones and domestic ones. The imported ones are smooth after cutting and the domestic ones will generate bubbles because it contains too much impurity. Low speed machines are usually adopted for...

Wooden engraving is usually used in die-boards, wood models, wood joint boards, engraving clothes rack, wood photo frame, and others. Wood plates are classified into plywood, solid wood, MDF and the plywood is the widest application. Usually, plywood includes three specifications: 3mm, 5mm and...

Light materials: most are PVC with cloth or paper on surface. The process technologies include drilling holes, engraving flowers, cutting formats, etc. Some need defocus lines, some cuts formats. The most important element is size. The usual cutting speed is 1.5 meters per minute and optical...

The slots of cutters are mainly 0.45mm and 0.7mm. It’s of high requirements to the slots and the widths of the slots are required to be basically the same. The materials include MDF and a 6mm adhesive plate; both are hard and should be cut with slow speed. Thus air compressor is a must....

Usually absolute black materials are used for engraving because it contains rare impurity. Thus the treated portrait will be clear. The engraving speed is usually 8 meters per minute and the optical density 40%, the resolution 600dpi, 45 net lines per inch.

Clothing cutting usually adopts CM series or TM series of high speed cutters usually with 50mm focusing lens and the normal single layer cutting speed is 5 meters per minute, the optical density is 40%. The power of air pump, the evenness and quality of honeycomb bottom plate, and the optical...

YM series if machines are adopted for rubber plate engraving. Generally, the 50mm focusing lens and PLT and BMP format are chosen. PLT is mainly used for edge engraving. Each format has its own advantages and it should be analyzed according to the actual case. If the height of the character to...

Graphics should be made according to the colors of the materials. The same graphic will be engraved into two different effects on white and black double color templates. 50mm focusing lens are usually used for engraving and the resolution is usually set to 350-500 dpi, the speed 2-20 meters...